This 3-way PH sensor is a 3 in 1 device to monitor PH, moisture, and light intensity, that give a quick idea about your plant health and do adjustments for better plant care. It is a compact device and works perfectly for both outdoor and indoor plants, veggies, flowers, and lawns. The device saves time, money, and effort because healthy soil produces healthy plants that resist insect damage and disease. For example, without knowing the PH level of soil you can easily waste money on amendments that you don’t need.
Moisture meter: lets you know that it is dry and needs water or wet and could use a day to dry out, you will never over/under water your plants again.
PH meter: helps you to control PH level in soil, acidic, or alkaline is suitable for your plants. PH level is the most important factor that can be overlooked in the garden. PH is the indication of the availability of the nutrients and plants’ ability to take them up. If the PH of your garden is not in the optimal range for the plants then you are trying to grow, you may end up having issues. Often plants that grow in soil that do not have an optimal level of PH don’t produce or if they do their harvests are low while the plants may look stressed. PH is measured on 14 points, 0 being most acidic, 7 neutral, and 17 most basic.
Light intensity: it indicates whether your plants getting adequate sunlight.
All the above 3 measurements help you to ensure the best care to your plants and keep the garden, soil, lawn, and plant happy and healthy.
- Determine when to water
- motor PH level of soil
- Determine whether your plant is getting adequate sunlight or not
- Compact size
- Easy to use
- Requires no battery to operation
- Suitable for both indoor and outdoor application
- Scientifically accurate
- Moist reading range: 0 DRY-10 WET
- Light reading range: 0 DARK-2000 LUMEN
- PH reading range: 8 ALKALINE-3.5 ACIDIC
- Moist value (1-10RH):
- 1-3(RED): need to water
- 4-7(GREEN): favorable moisture
- 7-10(BLUE): too wet
- PH value (8-3.5):
- Neutral solution: =7
- Acid reaction: <7
- Alkaline reaction: >7
- Light value (o-2000 Lux): higher value means the greater intensity of light
Remove probe of device and clean after every use to avoid damage in electrodes