-46%

ATmega328P Microcontroller with BootLoader

SKU: EC0051

Atmel developed AVR family of microcontrollers in the beginning of 1996. These are the modification of Harvard architecture 8-bit RISC single-chip microcontrollers.

**Product image is for reference purpose only. Actual product may differ from image shown

180.00 335.00

ATmega328P Microcontroller with BootLoader

Atmel developed AVR family of microcontrollers in the beginning of 1996. These are the modification of Harvard architecture 8-bit RISC single-chip microcontrollers. AVR was one of the first microcontroller families to use on-chip flash memory for program storage, as opposed to one-time programmable ROM, EPROM, or EEPROM used by other microcontrollers at the time.

The Atmel AVR® core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in a single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

Atmega328p microcontroller features

  • High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
    • Advanced RISC Architecture
      • 131 Powerful Instructions
      • Most Single Clock Cycle Execution
      • 32 x 8 General Purpose Working Registers
      • Fully Static Operation
      • Up to 20 MIPS Throughput at 20MHz
      • On-chip 2-cycle Multiplier
    • High Endurance Non-volatile Memory Segments
      • 32KBytes of In-System Self-Programmable Flash Program Memory
      • 1KBytes EEPROM
      • 2KBytes Internal SRAM
      • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
      • Data Retention: 20 years at 85°C/100 years at 25°C(1)
      • Optional Boot Code Section with Independent Lock Bits
    • In-System Programming by On-chip Boot Program
    • True Read-While-Write Operation
      • Programming Lock for Software Security
    • Atmel® QTouch® Library Support
      • Capacitive Touch Buttons, Sliders and Wheels
      • QTouch and QMatrix® Acquisition
      • Up to 64 sense channels
    • Peripheral Features
      • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
      • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
      • Real Time Counter with Separate Oscillator
      • Six PWM Channels
      • 8-channel 10-bit ADC in TQFP and QFN/MLF package
      • 6-channel 10-bit ADC in PDIP Package
    • Temperature Measurement
      • Two Master/Slave SPI Serial Interface
      • One Programmable Serial USART
      • One Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
      • Programmable Watchdog Timer with Separate On-chip Oscillator
      • One On-chip Analog Comparator
      • Interrupt and Wake-up on Pin Change
    • Special Microcontroller Features
      • Power-on Reset and Programmable Brown-out Detection
      • Internal Calibrated Oscillator
      • External and Internal Interrupt Sources
      • Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
    • I/O and Packages
      • 23 Programmable I/O Lines
      • 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
    • Operating Voltage:
      • 8
        • 5V
      • Temperature Range:
        • -40°C to 105°C
      • Speed Grade:
        • 0 – 4MHz @ 1.8 – 5.5V
        • 0 – 10MHz @ 2.7 – 5.5V
        • 0 – 20MHz @ 4.5 – 5.5V
      • Power Consumption at 1MHz, 1.8V, 25°C
        • Active Mode: 0.2mA
        • Power-down Mode: 0.1μA
        • Power-save Mode: 0.75μA (Including 32kHz RTC)

 

SKU: EC0051 Category: Tag:

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.