IoT & Wireless, Modules
nRF24L01 Wireless Transceiver Module 2.4GHz RF Transceiver Module
SKU: DSM112Product specification
- Product type: nRF24L01 Module
- Function: RF wireless transceiver module
- Colour: black
- Number of pins: 8
- Weight: 10g
- Package contains: 1 x nRFL01 RF Module
₹99.00
nRF24L01 is an RF wireless signal chip radio transceiver module for 2.4 GHz ISM band. NRF Module has an inbuilt fully integrated frequency synthesizer, power amplifier, crystal oscillator, demodulator, modulator, and enhanced shock burst protocol engine. It has built-in power down and standby modes which makes power saving realizable. The module is easily programmable through SPI interface and output power, frequency channels and setup can be easily programmed.
Specification
- Operating Voltage: 3.3V
- Nominal current: 50mA
- Maximum operating current: 250mA
- Working frequency range: 2.4GHz
- Range: 50 to 200 feet
- Communication protocol: SPI
- Baud rate: 250 Kbps to 2 Mbps
- Maximum node: 6
- Channel range: 125
Pin Description
- GND
- Vcc
- CE
- CSN
- SCK
- MOSI
- MISO
- IRQ
Based on 1 review
Add a review
You must be logged in to post a review.
Related products
-
Modules, Sensors, Sensors and Modules
Soil Moisture Sensor Module Soil Hydrometer Humidity Detector
Product specifications
- Product type: soil moisture sensor
- PCB Dimension: 3mm x 15mm
- Soil probe size: 6mm x 30mm
- Cable size: 2.1mm
- Weight: aprx 10g
- Colour: as shown in image
- Package contains: 1 x Soil moisture sensor with 1 x soil probe and 1 x cable or wire
SKU: DSM058 -
Modules, Sensors and Modules
360 Degree Rotary Encoder Module Brick Sensor encoding module for arduino
Modules, Sensors and Modules360 Degree Rotary Encoder Module Brick Sensor encoding module for arduino
Product specifications
- Module: M274
- Type: Incremental electromechanical
- Working voltage: 10 g
- Dimensions: 32 mm x 19 mm x 30 mm
- Material: PCB and Brass
- Working voltage: 0 to 5 v
- Cycles per rotations: 20
- Package contains: 1 piece of as described rotatory encoder
SKU: DSM013 -
Modules, Sensors and Modules
4 X 3 Keypad Matrix Module Membrane Switch
Product specifications
- Product type: 4 X 3 keypad module
- Keypad Dimensions: 5.9 cm X 7.9 cm
- Cable dimensions: 2.0 cm X 8.8 cm
- Maximum rating: 24 VDC, 30 mA
- Pin counts: 7
- Compatible with: Arduino, controller, processor etc
- Colour: as shown in image
- Package contains: 1 piece of 4 X 3 keypad module
SKU: DSM014 -
Display Devices, Modules, Sensors and Modules
8×8 Dot LED Matrix display LED Display Module
Product specifications
- Product type: 8×8 LED matrix
- Chip or IC: MAX7219
- Voltage supply: 3.7-5.3V
- Current supply: 320mA
- Dimensions
- Display: 32mmX32mmx6
- PCB: 50mx32mm
- LED size: 5mm
- Package contains: 1 piece of 8×8 LED matrix and 1 piece of connecting wire
SKU: DSM021 -
Modules, Sensors and Modules
JoyStick Module PS2 Breakout Sensor
Product Details
- Directional movements are simply two potentiometers – one for each axis
- Compatible with Arduino interface
- The biaxial XY Joystick Module KY-023 applies ARDUINO
- Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
- 5 Pin
- Colour: Black
SKU: DSM045
kailashdebnath98 –
I needed the version with the 2dB antenna, but here only the normal one is available…..
kailashdebnath98 –